Sony MKS-6550, User Manual

Page: 214 / 454

USO
RESTRITO
214
Applying Special Effects (Lighting and Recursive Effects)
Ch
a
p
te
r 10
DM
E
O
p
e
ra
ti
o
n
s
2
Set the following parameters.
No. Parameter Adjustment
1 Shape Ptn Shape pattern
a)
2 Size Shape size
3 Deform
Amount of shape deformation
b)
4 Soft Softness of shape pattern
5 Angle Angle of shape pattern rotation
a) For more information about the shape patterns,
1 “Shape Patterns”
(p. 419) .
b) Smaller values make the pattern more rounded.
To rotate the shape pattern
1
In the Light 1 menu (4156.3), press [Shape Speed],
turning it on.
The display for the 5th parameter that was visible
when [Shape] was selected changes.
2
Set the following parameter.
No. Parameter Adjustment
5 Speed Rotation direction and speed
To change the light to a ring shape
Notes
If you select [Parallel] or [Whole] (
1
p. 213) in the <Spot
Mode> group and shaping is disabled, the Ring parameter
cannot be set.
1
In the Light 1 menu (4156.3), press [Ring], turning it
on.
2
Set the following parameters.
No. Parameter Adjustment
1 Offset Offset from center position
(radius)
2 Radius Radius of ring
3 Angle Rotation angle of ring
Notes
There is no Radius setting when [Line] is selected in
the <Spot Mode> group.
To rotate the ring
1
In the Light 1 menu (4156.3), press [Ring Speed],
turning it on.
The display for the 3rd parameter that was visible
when [Ring] was selected changes.
2
Set the following parameter.
No. Parameter Adjustment
3 Speed Rotation direction and speed
To invert the lighted area
In the Light 1 menu (4156.3), press [Light Invert], turning
it on.
To add color to the light source
1
Open the Light 1 >Light Color Adjust menu (4156.4).
2
In the <Fill Blending Mode> group, select how the
light and image should be blended.
Mix: Light as if reflected from a mirror.
Multiply: Light as if reflected from a dull surface
(diffuse reflection).
3
If you selected [Mix], select the fill color in the <Fill
Source> group.
Flat Color: Monochrome color matte
Hue Rotation: Color matte with a color that gradually
varies.
4
According to the selection, set the following
parameters.
When Flat Color is selected
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
4 Brilliancy
Brilliance of surface struck by
light
When Hue Rotation is selected
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Speed Speed at which hue changes
4 Brilliancy Brilliance of surface struck by
light
Copying or swapping light source settings
You can copy or swap the setting from one light source
(Light 1 to Light 3) to another light source.
1
In the Spot Lighting menu (4156), press [Copy/Swap].
The Copy/Swap menu (4156.2) appears.