USO
RESTRITO
444
Error Messages
A
p
p
e
n
d
ix
Icon
Message
Description
Prepare failed, insufficient Clip id (
–
15).
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, there were insufficient Clip IDs (internal
processing error).
Restore failed, Cannot find symbol
files on this tape (
–18).
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, a marker frame file could not be found.
ERROR (
–19). Bad register number.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, the Register Number was an invalid
value (internal processing error).
Restore failed, file name already exist,
try to rename but unsuccessful (
–20).
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, renaming failed.
Cannot find the File Name Data,
please load the File Name Data first
(
–21).
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, the file list was not loaded.
Set Time/Date
Error: Wrong Format.
7317: Engineering Setup >System >Maintenance
A correct date and time was not specified. Specify the correct date and time.
Trim
The Start TC or Stop TC is not
properly set.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, neither the Start TC nor the Stop TC was set.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, the interval between Start TC (or Clip Begin) and
Stop TC (or Clip End) was the entire clip.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, the Start TC (or Clip Begin) value was greater
than the Stop TC (or Clip End) value.
This file is locked.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, the file was locked.
This file is using for playback.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, the target file was being played back.
Warning
This operation will be cancelled,
because the register is locked.
Please change the register status to
be unlocked first.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store >Edit
6411.1: Shotbox >Register >Store >Edit
When [Store] was pressed, the target register was locked. Unlock the
register before executing [Store].
Error Messages Shown in the Error Information Menu
If a file transfer related error occurs, the Error Information
menu appears to the following error messages.
Error message
Error description/measures
[Error] Server Not Respond
There is absolutely no response on the LAN from the processor.
Check your LAN connections and the power source of the processor.
[Error] No Space
There is insufficient space in the local disk or removable disk.
If a message other than those above appears, store the data
or recall the data again. If the error message persists,
contact your Sony service representative.
