Sony MKS-6550, User Manual

Page: 112 / 454

USO
RESTRITO
112
Overview
Pattern group Effect
Page Turn The old video moves like a page turning, and the new video appears behind it.
Roll The new video unrolls like a scroll over the old video. This is a type of page turn.
Frame I/O Completed in two transitions. In the first transition, the new video appears, then on the second
transition the new video goes out and the old video returns.
P in P
• In one-channel mode, this completes in two transitions.
- In the first transition, the old video shrinks, and the new video appears behind it.
- In the second transition, the old video expands again until it is its original size.
• In two-channel mode, in the first half of the transition, the old video shrinks, and the new video
appears.
- In the second half of the transition, the new video expands, and the old video disappears.
- You can move the pattern from the current position by a relative amount.
- During the transition, the signal from the utility bus of the M/E bank appears as the background.
2D Trans
The new video appears over the old video, while undergoing expansion, two-dimensional rotation and
translation.
3D Trans
• In one-channel mode, the new video appears over the old video, while undergoing expansion, three-
dimensional rotation and translation.
• In two-channel mode, the old video changes to the new video while both undergo expansion, three-
dimensional rotation and translation.
Sparkle The new video appears over the old video with a nonlinear effect applied, such as broken glass,
explosion, or melt. Then the original video returns as the effect gradually reduces.
Split Slide The new video appears in strip form while sliding interleaved in the opposite direction over the old
video.
Mosaic In the first half of the transition, a mosaic is gradually applied to the old video, then at the 50% point
the inner image changes to the new video. In the second half, the mosaic effect on the new video is
gradually reduced, returning to the original image at 100%.
Defocus In the first half of the transition, the old video is gradually defocused, then at the 50% point the inner
image changes to the new video. In the second half, the defocusing effect on the new video is
gradually reduced, returning to the original image at 100%.
Brick A brick, such that the side surface is visible, slides in over the old video, then rotates so that the new
video can be seen.
User Program Using a DME keyframe effect created with a keyframe operation, this executes a DME wipe.
For details about creating keyframe effects,
1 “Creating User Programmable DME Patterns” (p. 121)
.
Resizer Slide Performs a
“Slide” DME wipe using a resizer.
Resizer Squeeze Performs a
“Squeeze” DME wipe using a resizer.
Resizer Frame I/O Performs a
“Frame I/O” DME wipe using a resizer.
Ch
a
p
te
r 6
DM
E
W
ip
e
s
DME wipe execution mode and pattern numbers that can be used
There are two DME wipe execution modes, depending on
the number of DME channels available: one-channel mode
(1ch) and two-channel mode (2ch).
Notes
2-channel mode patterns are not supported on the MVS-
3000.
The channel mode and pattern number supported in each
pattern group is given below.
For details about pattern images (excluding user
programmable DMEs),
1
“DME Wipe Pattern List”
(p. 381) and
1
“Resizer DME Wipe Pattern List”
(p. 385) .
DME wipe pattern MVS-6520/6530/3000A MVS-3000
Group Execution
mode DME wipes in common
transitions DME wipes in
independent key
transitions DME wipes in common
transitions DME wipes in
independent key
transitions
Background Key Background Key
Slide 1ch 1001 to 1008 1001 to 1008
–
2ch 2601 to 2608
– – –