Sony MKS-6550, User Manual

Page: 120 / 454

USO
RESTRITO
120
Basic DME Wipe Setting Operations for Independent Key Transitions
Ch
a
p
te
r 6
DM
E
W
ip
e
s
Setting the DME wipe pattern size (Size)
For details about applicable pattern numbers, see “Size” in
“DME Wipe Pattern Variations and Modifiers”
(
1
p. 114) .
1
In the Key1 DME Wipe Adjust menu, press [Size],
turning it on.
2
Set the following parameter.
No. Parameter Adjustment
1 Size Effect size
a)
a) The effect size when [Size] is off is taken as 100.00%.
Adjusting the wipe pattern cropping (Crop)
1
In the <Crop Mode> group of the Key1 DME Wipe
Adjust menu, press [Crop], turning it on.
2
Set the following parameters.
Parameter group [1/2]
No. Parameter Adjustment
1 H Crop the left and right of the
image
(“Left” value is displayed)
2 V Crop the top and bottom of the
image
(“Top” value is displayed)
3 All Crop the top, bottom, left, and
right of the image
(“Left” value is displayed)
Parameter group [2/2]
No. Parameter Adjustment
1 Top Crop the top of the image
2 Left Crop the left of the image
3 Right Crop the right of the image
4 Bottom Crop the bottom of the image
To crop to 4:3 aspect ratio in 16:9 mode
In the <Crop Mode> group, press [4:3 Crop], turning it on.
To set the operation for DME wipe crop transition
execution
1
In the <Crop Mode> group of the Key1 DME Wipe
Adjust menu, press [Crop], turning it on.
2
In the <Crop Mode> group, press [Crop] or [4:3 Crop]
(to crop from 16:9 to 4:3 aspect ratio), turning it on.
3
In the <Crop Mode> group, press [Remove From
Begin].
The Remove From Begin menu (1116.7) appears.
For subsequent operations, see step
5
in
“To set the
action when a DME wipe crop transition is executed”
(
1
p. 118) .
To set the timing of transition completion
1
In the <Crop Mode> group of the Key1 DME Wipe
Adjust menu, press [Crop], turning it on.
2
In the <Crop Mode> group, press [Remove From
Begin].
The Remove From Begin menu (1116.7) appears.
For subsequent operations, see step
3
in
“To set the
timing of transition completion” (
1
p. 118) .
Modifying the DME wipe pattern edge
(Edge)
1
In the <Edge> group of the Key1 DME Wipe Adjust
menu, select one of the following.
Border
Soft Border
2
Set the following parameters.
When Border is selected
No. Parameter Adjustment
1 Width Border width
3 Luminance Luminance of border color
4 Saturation Saturation
5 Hue Hue
When Soft Border is selected
No. Parameter Adjustment
1 Width Border width
2 Inner Soft Border inner softness
3 Luminance Luminance of border color
4 Saturation Saturation
5 Hue Hue
Specifying DME wipe direction
For details about the corresponding pattern number,
1 “DME Wipe Pattern Variations and Modifiers”
(p. 114) .
Select one of the following in the <Direction> group of the
Key1 DME Wipe Adjust menu.
Normal: Wipes in the normal direction.
Normal/Reverse: Switches between normal and reverse
for each transition.
Reverse: Wipes in the opposite direction to normal.