USO
RESTRITO
8-Keyer Operation
415
A
p
p
e
n
d
ix
DSK5 to DSK8 cut execute
K5-K8 TRANS button
Register name buttons
KSS STOR button
buttons (key source names)
Transition type selection buttons
DSK5 to DSK8 auto transition execute buttons
To insert/delete DSK5 to DSK8 using cuts
Press one of the source name buttons in the top row.
To insert/delete DSK5 to DSK8 using auto
transitions
Press one of the [DSK5 TRNS] to [DSK8 TRNS] buttons
in the bottom row.
TRNS RATE button
KEY ON button
Independent Key Transition Settings
and Key Snapshot Operations in the
Flexi Pad
Switching the Flexi Pad operating mode
1
On the transition control block, press the [KEY
TRANS ADJ] button, turning it on.
The button display changes as shown below.
AUTO TRNS button
Flexi Pad
Selecting a key
For details,
“Selecting DSK5 to DSK8 in the Flexi
Setting the transition type
Press the transition type selection button corresponding to
the desired type.
Setting the transition rate
Press the [TRNS RATE] button and enter the transition
rate in the same way as for keys 1 to 4
KEY TRANS ADJ button
8-keyer transition control block (ICP-
6520/6530 PGM/PST bank)
2
Press one of the [K1TR ADJ] to [K8TR ADJ] buttons.
The memory recall section on the Flexi Pad switches
to independent key transition operation mode for the
selected key.
You can control independent key transitions and key
snapshots using the buttons in the memory recall
section.
Inserting and deleting keys
Press the [KEY ON] button.
To insert/delete using an auto transition, press the [AUTO
TRNS] button.
Saving/recalling key snapshots
To save a key snapshot, press and hold down the [KSS
STOR] button, and press a register name button.
To recall a key snapshot, press the register name button for
the register you want to recall.
Buttons for accessing menus using
double-press
You can recall the related menu pages by double-pressing
the following buttons in the Flexi Pad.
