Sony MKS-6550, User Manual

Page: 189 / 454

USO
RESTRITO
Applying Special Effects (Overall Signal Effects)
189
No. Parameter Adjustment
3 Soft Softness
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
No. Parameter Adjustment
1 H Horizontal position
2 V Vertical position
3 Size Size of mask
4 Soft Softness of mask
5 Pattern
Pattern number
a)
Ch
a
p
te
r 10
DM
E
O
p
e
ra
ti
o
n
s
4
Press [Matte] and set the glow color.
When turning [Aspect] on and setting the aspect
ratio of the pattern
No. Parameter Adjustment
1 Aspect Aspect ratio
When turning [Angle] on in the <Rotation> group
and slanting the pattern
No. Parameter Adjustment
1 Angle
Rotation angle of pattern
a)
To invert the highlight areas
Press [Glow Invert], turning it on.
The highlight and non-highlight areas are inverted.
To mask the Glow effect with a selected pattern
Press [Mask] to display the Mask menu (4127)
(
1
p. 189) , and set the pattern type and modifiers.
Mask Settings
Applying masks
1
Open the DME >Video Modify >Mask menu (4127).
2
In the <Mask> group, press the button for the group of
the effect to which you want to apply the mask, turning
it on.
Effect Gp1: Posterization, Solarization, Nega, Sepia,
Mono, Contrast, Mosaic, Sketch, Metal
a)
1
p. 104 .
When turning [Speed] on in the <Rotation> group and rotating the pattern at a constant rate
No. Parameter Adjustment
1 Speed
Rotation speed of pattern
a)
a)
1
p. 104 .
Notes on applying a mask effect with a
DME (only when using the MVE-9000)
In the <Mask> group of the DME >Video Modify >Mask
menu (4127), if [Effect Gp1] and [Effect Gp2] are
simultaneously set to On, then the border or beveled edge
is also masked.
The following explains this with the example of using a
circular mask pattern.
Image 1: Image before applying mask
Effect Gp2: Defocus, Blur, Glow
Notes
On the MKS-6570 and MVE-8000A, [Effect Gp1] and
[Effect Gp2] cannot be turned on at the same time.
3
Press [Position/Size].
4
Set the mask source parameters.
Border or
beveled edge
m
Image 2: State with only [Effect Gp1] set to On
Portion
2
has
“Mono” masked,
and only
“Defocus”
applied.
Image with
“Mono(chrome)”
or
“Defocus”
applied
Portion
1
has
both
“Mono”
and
“Defocus”
applied.
a) Pattern 304 is not supported by the MKS-6570 or MVE-8000A.
5
To invert the black and white of the mask source, press
[Invert], turning it on.
6
As required, set the modifiers for the mask pattern.
m
In the state corresponding to image 2, if you switch [Effect
Gp2] to On, then the mask should be applied to portion
2
only. In fact, however, the border or beveled edge is also
masked.