USO
RESTRITO
Basic Menu Operations
49
Ch
a
p
te
r 2
Na
m
e
s
and
Fun
c
ti
o
n
s
of
P
a
rts
Color Palette Window
When parameters are assigned as a combination of
luminance, saturation, and hue, pressing a parameter
setting button displays a color palette window.
1
Color palette buttons
2
Operation buttons
3
Color display
4
Numeric keypad
a
Color palette buttons
Press one of these to display the corresponding color in the
color display.
b
Operation buttons
Set:
If you press any color palette button with this button
held down, the color shown in the color display is
assigned to the color palette button.
Copy:
If you press a color palette button with this button
held down, the color is used as the source for copying.
Next press a different color palette button to copy to
that button.
Swap:
If you press two color palette buttons in sequence
with this button held down, the two colors are
swapped.
Default:
If you press any color palette button with this
button held down, the color palette button is set to the
default color.
c
Color display
This shows the setting color and its parameters (LUM,
SAT, and HUE).
d
Numeric keypad
Use this to enter numeric values for parameters.
For details,
“Numeric Keypad Window” (p. 47)
Basic Menu Operations
Notes
Some menus may not be displayed depending on the
system configuration.
Some functions and items not supported by the MVS-
6520, MVS-3000A, or MVS-3000 may be displayed in
parts of the menu. These items are ignored, even if selected
and values specified, and are not reflected in the system
operation.
For details,
“Menus of Disabled Operations and
By adjusting the parameters, you can create any color.
If a parameter value is outside the permitted range for RGB
(0 to 255), the “Illegal Color” indication appears, and this
is adjusted to a value within range.
Cancel:
Pressing this button returns to the state when the
color palette window was opened.
Recalling Menus
The following three methods are available for recalling
menus.
