Sony MKS-6550, User Manual

Page: 196 / 454

USO
RESTRITO
196
Applying Special Effects (Nonlinear Effect Settings)
No. Parameter Adjustment
2 Random Degree of randomness in
distance moved by each block
3 Angle Direction of movement
No. Parameter Adjustment
1 H Horizontal center position
2 V Vertical center position
No. Parameter Adjustment
1 Width Width of partition
2 Random Degree of randomness in
partition width
3 Angle Partition angle
No. Parameter Adjustment
1 Transition H Degree of left and right
separation
2 Transition V Degree of top and bottom
separation
No. Parameter Adjustment
1 Rotation Number of rotations of the blocks
2 Perspective Degree of randomness in
distance moved by each block
No. Parameter Adjustment
1 Top Amount of movement of top
2 Left Amount of movement of left
3 Right Amount of movement of right
4 Bottom Amount of movement of bottom
No. Parameter Adjustment
1 Width Width of partition
2 Offset Degree of randomness in
partition width
3 Angle Starting angle of effect
No. Parameter Adjustment
1 H Position of left and right
separation
2 V
Position of top and bottom
separation
No. Parameter Adjustment
4 No. Width of blocks
5 Phase Partition position
Ch
a
p
te
r 10
DM
E
O
p
e
ra
ti
o
n
s
1
Press [Position].
2
Set the following parameters.
3
To set the partition method, press [Partition] and set
the following parameters.
Split Settings
You can set the degree to which the image is split, the split
positions, and other parameters.
Applying the Split effect
Blind Settings
You can set the number of rotations by blocks, the
perspective, the width and position of blocks, the direction,
the center position, and other parameters. There are two
modes: Bar and Wedge.
Applying the Blind effect
1
In the <Mode> group of the Non Linear >Blind menu
(4141.10), select [Bar] or [Wedge].
2
To make transition settings, press [Transition] and set
the following parameters.
1
In the <Mode> group of the Non Linear >Split menu
(4141.11), select the split method.
Single: Leave gaps between splits.
Double: Fill gaps between splits with the same image.
2
Set the following parameters.
Parameter group [1/2]
Parameter group [2/2]
3
To set the partition method, press [Partition] and set
the following parameters.
When Bar was selected in step 1
When Wedge was selected in step
1
To set the wedge center position
When [Wedge] is selected in the <Mode> group, you can
set the wedge center position.
To set the split position
1
Press [Position].
2
Set the following parameters.