manualshive.com logo in svg

Siemens SIMATIC 505, User Manual, Page: 133 / 216

Share
Download
Siemens SIMATIC 505 User Manual Download Page 133

Simatic 505 SoftShop 

6 - Programming 

••••

 127

To invoke Password from Online or Offline:

1.

 

Click on Password from the PLC Utilities menu (Alt+U, W).

2.

 

The Password dialog box is displayed in the format shown in
Figure 6.12e.

Figure 6.12e

Offline Password Selection and Access Level

The buttons in Figure 6.12e are defined below:

•

 

Close-

Allows you to return to the ladder display screen.

•

 

Enter Password

-

Allows you to enter or change the password

for the selected program on disk. SoftShop prompts you for
the new password twice. If the new passwords are not the
same, the password is not changed. To delete a password (or
to make the selected program on disk unprotected), enter a
null password or press clear and enter a new password.

•

 

No Access

-Allows you to set the protection level of the

controller for no access. This option is written to the
controller when you perform an (Open) function. No Access
does not work without a password.

•

 

Read Only-

Allows you to set the protection level of the

controller for read-only access. This option is written to the
controller when you perform an (Open) function.

 

Read Only

does not work without a password.

•

 

Full Access-

Allows you to set the protection level of the

controller for full read/write access. This option is written to
the controller when you perform an (Open) function. Full
Access does not work without a password.

Online Password Selection and Access Level

The buttons in Figure 6.13 are defined below:

•

 

Close-

Allows you to return to the ladder display screen.

•

 

Enter Password

-

Allows you to enter or change the password

for the selected program in the controller. SoftShop prompts
you for the new password twice. If the new passwords are not
the same, the password is not changed. To delete a password
(or to make the selected program on disk unprotected), enter a
null password or press clear and enter a new password.

•

 

No Access-

Allows you to set the protection level of the

controller for no access. This option is written to the
controller. No Access does not work without a password.

•

 

Read Only-

Allows you to set the protection level of the

controller for read-only access. This option is written to the
controller. Read Only does not work without a password.

•

 

Full Access-

Allows you to set the protection level of the

controller for full read/write access. This option is written to
the controller. Full Access does not work without a password.

•

 

Enable Password-

Allows you to enable password protection

for the controller.

Summary of Contents for SIMATIC 505

























































































































































































































Reviews:

No comments