manualshive.com logo in svg

Siemens SIMATIC 505, User Manual

The Siemens SIMATIC 505 is a high-performance automation system. To ensure seamless operation, it is essential to have the User Manual handy. Get the comprehensive manual absolutely free and easily downloadable from our website, manualshive.com. Harness the full potential of your SIMATIC 505 with this essential resource.

Share
Download
background image

96 

••••

 6 - Programming

Simatic 505 SoftShop

4.

 

Position the pointer where you wish to place the instruction.

5.

 

Click the left mouse button, and the instruction is placed in that
location. If an instruction cannot be placed in that location, an
error message is displayed.

6.

 

The instruction remains attached to the pointer. Click the left
mouse button once for each additional instruction you want to
insert. Click the arrow in the middle of the Instruction Bar or
another instruction to remove the instruction from the pointer.

Using the menu to enter instructions with the keyboard:

1.

 

In the active Special Function Program, use the arrow keys to
move the cursor to the spot you wish to place the instruction.

2.

 

Type in the character numonic for the instruction or Press
Alt+P, I to open the Selection Instruction dialog box from the
Program menu.

3.

 

Use the arrow keys to move up and down the Group and
Instruction scroll boxes, and the Tab key to move between the
boxes.

4.

 

Highlight desired instruction, and press Enter to insert the
instruction.

5.

 

Repeat Steps 1 through 5 for each instruction you want to enter.

Editing Logic

505 SoftShop uses a number of time-saving editing features to help you
complete your programming tasks. These include:

•

 

Cut

•

 

Copy

•

 

Paste

•

 

Paste with Rewire

•

 

Insert

•

 

Clear

•

 

Delete

These editing features are accessed through the Edit menu and keyboard
commands. Please see Chapter 3, 

505 SoftShop Basics

, for a more

complete description of the editing features.

Cut, Copy, and Paste are probably the most frequently used editing
features. The list below describes Cut, Copy, and Paste differences.

Cut

Removes the selection from the program and places it in the clipboard.

Copy

Copies the selection and places it in the clipboard.

Paste

Inserts clipboard contents into the program at the cursor location.

Paste With Rewire

Inserts clipboard contents into the program at the cursor location and allows
the user to re-address any addressable items contained in the clipboard. You
can also copy tags and descriptions.

Cut

To use the cut feature:

Summary of Contents for SIMATIC 505

























































































































































































































Reviews:

No comments

Related manuals for SIMATIC 505

V-Tec DT591 User Manual preview
DT591
Brand: V-Tec Pages: 16
Nedap PROX-BOOSTER 2G Installation Manual preview
PROX-BOOSTER 2G
Brand: Nedap Pages: 25
Challenger Lifts 4030EAX Installation, Operation & Maintenance Manual preview
4030EAX
Brand: Challenger Lifts Pages: 20
cinetto PS40.3 Assembly Instructions Manual preview
PS40.3
Brand: cinetto Pages: 56
D&R ELECTRONICS RDS17S-ELITE1-R1 Installation Manual preview
RDS17S-ELITE1-R1
Brand: D&R ELECTRONICS Pages: 12
lancer Pure Link 1300 Series Installation And Service Manual preview
Pure Link 1300 Series
Brand: lancer Pages: 20
heat-timer Mini-MOD Installation And Operation Instruction Manual preview
Mini-MOD
Brand: heat-timer Pages: 36
Everpure Feeder/Deliming System EV9797-20 Specifications preview
Feeder/Deliming System EV9797-20
Brand: Everpure Pages: 2
M-system R7C-DC8C Instruction Manual preview
R7C-DC8C
Brand: M-system Pages: 9
Fastech Ezi-IO EtherCAT DA User Manual preview
Ezi-IO EtherCAT DA
Brand: Fastech Pages: 52
JBL Soundgear Series Service Manual preview
Soundgear Series
Brand: JBL Pages: 73
Parkside 383526 2107 Operating Instructions Manual preview
383526 2107
Brand: Parkside Pages: 124
Interroll ZoneControl Operating Manual preview
ZoneControl
Brand: Interroll Pages: 54
Advantech AIIS-1440 User Manual preview
AIIS-1440
Brand: Advantech Pages: 82
Bang & Olufsen BeoSound 3000 2671 Service Manual preview
BeoSound 3000 2671
Brand: Bang & Olufsen Pages: 68
2VV IC3-CONTROL Installation And Operation Manual preview
IC3-CONTROL
Brand: 2VV Pages: 29
Athena 850-BL EVO Translation Of Original Instructions preview
850-BL EVO
Brand: Athena Pages: 183
Aiwa CX-NA71 Operating Instructions Manual preview
CX-NA71
Brand: Aiwa Pages: 80

Brands by name

Popular brands

Load more brands