122
••••
6 - Programming
Simatic 505 SoftShop
Figure 6.12b
Task Codes Per Scan
Task Codes Per Scan is used to set the number of task codes processed
per scan for SF modules on each channel. To invoke the function:
1.
Click Task Codes Per Scan from the PLC Utilities menu
(Alt+U, A).
2.
The Task Codes Per Scan dialog box is displayed in the format
shown in
Figure 6.12c. Only numbers for the channels you
have configured are displayed; e.g., if you have four channels,
the number goes to 4.
3.
Type in the data field the number of task codes for SF modules
per scan.
4.
Click on the Write button to enter the numbers.
5.
Click Close to exit the Task Codes Per Scan and return to the
active logic program.
Figure 6.12c
Diagnostics on Base
Diagnostics on Base is used to run diagnostics on one or all the I/O
bases. To invoke the operation:
1.
Click Diagnostics on Base from the PLC Utilities menu (Alt+U,
D).
2.
The Diagnostics on Base dialog box is displayed in the format
shown in
Figure 6.12d.
3.
To run base diagnostics on one base:
•
Type in the channel and base number in their associated
data field.
•
Click on the Run Current button, and the data will be
displayed in the dialog box.
4.
To locate the Dual Media base:
•
Type in the channel and base number in their associated
data field.
