Simatic 505 SoftShop
6 - Programming
••••
107
Figure 6.8b
NOTE
Only validated and entered logic is considered part of the
current program. Thus, logic not entered and validated will not show in
the Cross Reference Table. See Validate and Enter Logic in this chapter.
2.
Type in the starting address in the corresponding address box or
network number in the corresponding network box, if selected.
Click on the Refresh button. The cross-reference will display
the selected information in the view window. The address is
displayed on the left side with the network number next to the
element. The Tag and Description of the selected address are
displayed on the bottom left of the screen.
3.
Select the logic item you want to view from the view window.
Click the Goto button to jump to the first occurrence of the
address you have highlighted or you can double click on the
item to do the same.
NOTE
If the Cross-Reference Table Status is not current, the
title line gives the current status of the cross-reference, click the Build
Table button to update the table.
4.
Close the Cross Reference window by double clicking on the
Control-menu box in the upper right corner of the Cross
Reference window.
NOTE
If you have Table Update checked in the Program Setup,
all changes made to segments that are validated and entered are
automatically updated in the Cross Reference window.
