106
••••
6 - Programming
Simatic 505 SoftShop
2.
From the menu select the type of forcing action you would like
to do.
From the Ladder Logic:
1.
From the Ladder Editor select the element to force.
2.
While on the element select the Diagnostics menu. From the
menu select the type of forcing action you would like to do.
Show Forces
To show all forced elements complete the following steps.
1.
Select the Data Window from the Veiw menu.
2.
Once in the Data Window click on the right mouse button or
left click on the Data menu.
3.
Select Show Forces from the menu.
Clear a Forced Element
To Clear a Forced Element from either Data Window or Ladder logic
editor complete the following steps.
From the Data Window:
1.
Click on the right mouse button while in the Data field of an
Element or the Data menu while in the Data field of an
Element.
2.
From the menu select the type of forcing action you would like
to do.
From the Ladder Logic:
1.
From the Ladder Editor select the element to force.
2.
While on the element select the Diagnostics menu. From the
menu select the type of forcing action you would like to do.
Complete Cross Reference
In both online (network mode only) and offline programming, you can
track addresses in a program by viewing the Cross Reference table.
Click
on the toolbar or select Cross Reference from the View
menu. The Cross Reference window appears, Figure 6.8b. If
you have more than one program loaded, the information
displayed is for the program in the active window. The cross
reference can be based on address or networks by checking the
desired radio button on the cross-reference dialog box.
