104
••••
6 - Programming
Simatic 505 SoftShop
select Save Template from the Data menu. To load a list of
addresses, select Load Template from the Data menu.
10.
Select On/Off from the right mouse menu to set or reset bit
addresses.
11.
Select Force On/Off from the right mouse menu to force on or
off bit addresses.
12.
Select Force Word from the right mouse menu to force a word
address.
13.
Select Clear Force from the right mouse menu to clear the
forced address.
14.
Use Clear All Forces from the right mouse menu to clear all
forced addresses.
15.
Press Show forces from the right mouse menu to display all
forced addresses. You will be prompted to enter a starting
address, and any addresses that are forced will be displayed.
16.
Press Status On/Off from the right mouse menu to turn off the
status updates.
17.
Select Fill from the right mouse menu to enter addresses from
the current location with the next addresses, until the end of the
window is reached. For instance, if your current address
location is 3000 in the fifth row, pressing Fill will enter the
addresses starting in row 6 with address 30002, etc.
18.
Double-click the Control Menu box in the upper left corner of
the active window to exit the Data Window.
Customizing the Display
The Data Window can be customized to display Tags, Descriptions, both
Tags and Descriptions, or neither. These columns can be displayed if
selected in the Program Setup.
To modify the display, select Options, Program Setup (Alt+O, P). In the
Data Window Tab dialog section, click on Tag to include tags and/or
click Descriptions to include Descriptions. De-select both if you do not
want to include Tags and Descriptions. For more Data Window display
options See
Program Setup
in Chapter 4.
Data Format
1.
Data Format is available for byte, word and double word
addresses. Select Format from the Data menu while in the Data
Window. The Data menu is available only while in the Data
Window. The Format dialog box appears (Figure 6.8).
