Siemens Rapidlab 1200, Operator'S Manual, Page: 315 / 448

Rapidlab 1200 Operator’s Guide: System Configuration 8-21
02087462 Rev. V
2. Change the date and time.
3. Select
Save
.
Setting up the Sound
You can adjust the volume for system sounds and videos, and turn off the sound
that occurs when you select buttons.
NOTE:
Other sounds, such as beeps that alert you to system events that require
your attention, are always on.
1. At the Setup screen, select
System Options > Sound
.
2. Adjust the volume or turn the sound off.
3. Select
Save.
Setting up Other Options
Use this procedure to enter a name that identifies the system and the phone
number for technical support. The system displays the name and phone number on
the System Information screen, but the system prints only the system name on
printed reports.
1. At the Setup screen, select
System Options > Other Options
.
2. Enter the telephone number.
3. Select
System Name
and then enter a name for the system.
4. Select
Save
.
If you want to... Then...
change the date,
a. Select
Date
.
b. Enter the date in the format shown on the screen.
Enter a leading zero before numbers less than 10. For
example, if the date format is mm/dd/yyyy, enter
February 4, 2007 as 02042007.
change the time,
a. Select
Time
.
b. Enter the time in 24-hour format.
Enter a leading zero before numbers less than 10. For
example, enter 10:07 PM as 2207.
If you want to... Then...
adjust the volume for the system
sound,
a. Select a number for the system volume level.
b. Select
Preview
to hear the volume at that level.
adjust the volume for the video
sound,
a. Select a number for the video volume level.
b. Select
Preview
to hear the volume at that level.
turn off the sound that occurs
when you touch buttons, select
Touch Sound
.