manualshive.com logo in svg

Siemens Rapidlab 1200, Operator'S Manual, Page: 177 / 448

Share
Download
Siemens Rapidlab 1200 Operator'S Manual Download Page 177

Rapidlab 1200 Operator’s Guide: Maintenance

5-35

02087462 Rev. V

2. Check the sensor for bubbles at the electrode tip and between the electrode 

compartment and the KCl reservoir.

Figure 5-17    KCl Reservoir

NOTE:

The fill solution can become slightly pink as a result of analyzing QC 

and AutomaticQC materials. A pink color that becomes very dark over a 
12-hour period indicates a pending failure of the reference sensor. Replace the 
reference sensor or the reference sensor cassette.

3. Tap the front face of the sensor with your knuckle to remove any bubbles.

4. Remove any salt deposits on the reference sensor using a lint-free swab 

moistened with water.

5. Dry the sensor thoroughly.

6. Ensure that the O-rings are in place on both sides of the sensor.

7. Replace any O-ring that is worn or damaged.

8. Clean the O-ring area on the spring-loaded latch using a lint-free swab 

moistened with water.

9. Reinstall the sensor.

Refer to 

Installing the Sensor

‚ page 5-31.

10. Verify the sensor performance.

Refer to 

Verifying Sensor Performance

‚ page 5-31.

1

KCl reservoir

2

Electrode compartment join to the KCl reservoir

3

Electrode tip

4

O-rings

Summary of Contents for Rapidlab 1200

































































































































































































































































































































































































































































Reviews:

No comments