manualshive.com logo in svg

Siemens Rapidlab 1200, Operator'S Manual, Page: 101 / 448

Share
Download
Siemens Rapidlab 1200 Operator'S Manual Download Page 101

Rapidlab 1200 Operator’s Guide: Operating the System

2-13

02087462 Rev. V

NOTE:

If you have a priority sample, but the system displays a message that 

the system is busy, select 

Cancel 

to interrupt the system. If Cancel is not 

available, wait until the system is not displaying the busy message to analyze 
the patient sample.

2. At the Analysis screen, select the button for capillary sample type.

3. Scan the barcode for the patient sample, if required.

4. Hold the capillary tube at the end closest to the sample port and insert the tube 

firmly in the sample port.

Figure 2-3    Rapidlab 1200 Systems Sample Port 

5. Select 

Analyze

.

NOTE:

If the system determines that insufficient sample is present or bubbles 

are in the sample, you are prompted to position the sample as you would a 
microsample. For information about analyzing microsamples, refer to 

Analyzing Microsamples

‚ page 2-14.

6. When prompted, remove the sample device and select 

Continue

.

7. If prompted, enter demographic information and select 

Continue

. 

1

Inserting the capillary tube

CAUTION: 

Do not leave the sample device in the sample port after the system 

prompts you to remove it. The system performs a wash after each sample analysis. 
Leaving the sample device in place while the system performs a wash could 
contaminate that wash with blood and adversely affect the next sample or system 
operation.

Summary of Contents for Rapidlab 1200

































































































































































































































































































































































































































































Reviews:

No comments