manualshive.com logo in svg

Siemens Rapidlab 1200, Operator'S Manual, Page: 147 / 448

Share
Download
Siemens Rapidlab 1200 Operator'S Manual Download Page 147

Rapidlab 1200 Operator’s Guide: Maintenance

5-5

02087462 Rev. V

1. Prepare the deproteinizer as directed on the package.

2. Select 

Status > Maintenance > Deproteinizing the Sample Path

.

3. Select 

Continue

.

4. If you have a Rapidlab 1260 or 1265 system, replace the Glucose and Lactate 

biosensors with the test/blank sensors:
a. Select the video button and follow the instructions in the video.
b. Select 

Continue

.

5. Aspirate the deproteinizer:

a. Invert the deproteinizer vial several times to mix the contents.
b. Draw the deproteinizer into a syringe and insert the syringe into the 

sample port.

c. Select 

Continue

.

d. When prompted, remove the syringe and select 

Continue

.

The deproteinizing cycle runs for 10 minutes. Any mechanical noise in 
the area of the sample port is normal and dissipates after the system 
analyzes a few blood samples. 

6. At the prompt, select 

Yes

 to condition the sensors or 

No

 to skip this step. 

Refer to 

Conditioning the Sensors

‚ page 5-6.

7. If you are not conditioning the sensors and you have a Rapidlab 1260 or 1265 

system, replace the test/blank sensors with the biosensors:
a. Select the video button and follow the instructions in the video.
b. Select 

Continue

.

8. Select 

Return

. 

9. Select 

Analyze

.

10. If you have a Rapidlab 1260 or 1265 system, select 

Yes

.

11. Analyze a minimum of 2 levels of quality control material to verify sensor 

performance.

Summary of Contents for Rapidlab 1200

































































































































































































































































































































































































































































Reviews:

No comments