Siemens Rapidlab 1200, Operator'S Manual, Page: 138 / 448

4-8 Rapidlab 1200 Operator’s Guide: Quality Control
02087462 Rev. V
Using the Recall QC Data Search Screen
The Recall QC Data Search screen allows you to search for a specific QC lot, QC sample
results performed between a defined date range, or a combination of criteria. The QC Data
Search screen acts as a filter to display only those results that meet the criteria you specify
on the Search screen.
1. At the QC List screen, select
Search
.
2. At the search screen, use the following search options to set your criteria:
NOTE:
Use the number pad to enter your criteria where necessary.
3. When you are done selecting the criteria, select
Continue
.
Select this option... To do this...
Lot enter the lot number of the control you
want to view.
If you do not enter a lot number, the
system displays all lots that meet the other
criteria you define.
Start Date enter the earliest date for search on a range
dates.
The start date must be earlier than the End
Date.
End Date enter the latest date for a search on a range
of dates.
If you do not enter an end date, the system
uses the current day date.
Level 1, 2, 3 display QC results according to level.
You may use any combination of levels or
select all three.
Unknown to display samples when levels are not
identified.
High G/L to select only High G/L results.
You can use this in combination with the
other options.