Home
/
Siemens
/
Rapidlab 1200
/
Operator'S Manual

Siemens Rapidlab 1200, Operator'S Manual, Page: 117 / 448

Share

Page: 117 / 448

Siemens Rapidlab 1200 Operator'S Manual Download Page 117

Rapidlab 1200 Operator’s Guide: Operating the System

2-29

02087462 Rev. V

Performing a Patient Search

1. Select

Recall > Patients > Search

.

2. In the Search criteria fields, enter data matching one or more search criteria.

•

To enter alphanumeric characters select the criterion button.

•

To enter numeric characters, select the criterion field.

3. For an exact match, select the Exact Match checkbox that is adjacent to the

criterion.
Only matches containing the exact data entered in the search field are
returned. For example, if 123 is entered, only 123 is returned as a result. If
Exact Match is not selected, entering 123 can return results such as 123456 or
456123.

4. Select

Continue

.

At the Patient screen, a table displays patient results.
•

A blank field indicates no results were returned for that field.

•

If a search fails to find a patient, the table displays without results.

•

Use the arrow keys to access results off-screen to the right in the table, if
needed.

5. To review detailed results or print results, select

Results

.

If results for more than one patient are returned, you must first select the
patient by selecting the patient row on the screen.
A results screen for the selected patient displays. In addition to the results
information that displays at the table on the previous page, this screen shows
units of measurement and displays negative results in red text.

6. Print results by selecting the Print icon at the Results screen.

«
...
115
116
117
118
119
...
»

Summary of Contents for Rapidlab 1200

































































































































































































































































































































































































































































Reviews:

No comments