manualshive.com logo in svg

Siemens Rapidlab 1200, Operator'S Manual, Page: 245 / 448

Share
Download
Siemens Rapidlab 1200 Operator'S Manual Download Page 245

Rapidlab 1200 Operator’s Guide: Troubleshooting

6-39

02087462 Rev. V

Performing the Sample Pump and Wash Pump Tests

Use this procedure to test the sample pump or the wash pump located on the 
system behind the reagent cartridge.

The pump test moves the pump at 4 speeds numbered 1 through 4. When you 
select 

Change

, the system displays the number of the current speed on the screen. 

The test is complete when the system displays speed 4 on the screen.

BIOHAZARD: 

Wear personal protective equipment. Use universal precautions. 

Refer to 

Appendix A, Protecting Yourself from Biohazards

 for recommended 

precautions when working with biohazardous materials.

1. Select 

Status > Diagnostics

.

2. Enter your password, if necessary.

3. Remove the reagent cartridge:

a. Select 

Cartridges > Eject R Cartridge

.

b. Remove the reagent cartridge from the system and close the door.
c. Select 

Return

.

4. Select 

Pumps and Valves

.

CAUTION: 

Do not remove the wash or reagent cartridges for longer than 6 hours. 

If the wash or reagent cartridge is removed from the system for longer than 6 
hours, the cartridges are no longer valid.

To test the...

Select...

sample pump, which is located on the 
right as you face the system,

Sample Pump > Start

. 

The pump rotates toward you at the first 
speed.

wash pump, which is located on the left as 
you face the system,

Wash Pump > Start

. 

The pump rotates away from you at the 
first speed.

Summary of Contents for Rapidlab 1200

































































































































































































































































































































































































































































Reviews:

No comments