manualshive.com logo in svg

Siemens Rapidlab 1200, Operator'S Manual, Page: 148 / 448

Share
Download
Siemens Rapidlab 1200 Operator'S Manual Download Page 148

5-6

Rapidlab 1200 Operator’s Guide: Maintenance

02087462 Rev. V

Conditioning the Sensors

Conditioning cleans and conditions the glass membranes of the pH and sodium sensors.

You need the following materials for this task:
•

Conditioner

•

Syringe

•

Glucose and Lactate test/blank sensors (TB4)

1. At user interface, select 

Status > Maintenance

.

2. Select 

Conditioning the Sensors

.

3. Select 

Continue

.

4. Select the video button and follow the instructions in the video. 

5. If you have a Rapidlab 1260 or 1265 system, replace the Glucose and Lactate 

biosensors with the test/blank sensors:
a. Select the video button and follow the instructions in the video.
b. Select 

Continue

.

BIOHAZARD: 

Wear personal protective equipment. Use universal precautions. 

Refer to 

Appendix A, Protecting Yourself from Biohazards

 for recommended 

precautions when working with biohazardous materials.

CAUTION: 

Do not expose the glucose and lactate biosensors to bleach, 

conditioner, or deproteinizer. Replace the biosensors with the test/blank sensors 
(TB4) before conditioning the sensors or deproteinizing the sample path. Reinstall 
the biosensors within 2 hours.

CAUTION: 

Do not remove or return the sensors to the measurement module 

without first discharging static buildup. Touch the inner surface of the 
measurement module frame to discharge static buildup.

Summary of Contents for Rapidlab 1200

































































































































































































































































































































































































































































Reviews:

No comments