manualshive.com logo in svg

Siemens Rapidlab 1200, Operator'S Manual, Page: 252 / 448

Share
Download
Siemens Rapidlab 1200 Operator'S Manual Download Page 252

6-46

Rapidlab 1200 Operator’s Guide: Troubleshooting

02087462 Rev. V

Performing the Wavelength Cal Test

The Wavelength Cal test verifies the proper operation of the CO-ox neon lamp and prints 
the results providing the system ID, the date and time of the report, and as represented in 
Table 6-7.

To perform the Wavelength Cal Report, select 

CO-ox > Wavelength Cal

.

Performing the CO-ox Sample Chamber Test

This test is only performed on Rapidlab 1245 and 1265 Systems.

Use this procedure to test the ability of the CO-ox sample chamber to move to the open 
and close positions. The systems displays the pass or fail results on a printed report.

1. Select 

Status > Diagnostics

. 

2. Enter your password, if necessary.

3. Select 

CO-ox > Start

.

The sample chamber moves to the open position.

4. Select 

Change

 to move the sample chamber to the closed position.

5. Select 

Stop

. 

The system prints the test results Passed or Failed.

6. Wait while the system returns the sample chamber to the correct position.

7. Select 

Return

.

8. To return to the Status screen, select 

Return

.

Table 6-7    Wavelength Cal Report

Row number

Data

1

Mean 

2

Standard deviation 

3

Measured position

4

Baseline position

5

Shift

6

Integration time from last zero

7

Serial number

Summary of Contents for Rapidlab 1200

































































































































































































































































































































































































































































Reviews:

No comments