manualshive.com logo in svg

Siemens Rapidlab 1200, Operator'S Manual, Page: 153 / 448

Share
Download
Siemens Rapidlab 1200 Operator'S Manual Download Page 153

Rapidlab 1200 Operator’s Guide: Maintenance

5-11

02087462 Rev. V

c. Disconnect the tubing from the connector at the pressure sensor bubbler.

5. Connect the new tubing:

a. Connect the new tubing to the spring-loaded latch.
b. Push the new tubing into the pinch valve.

Center the tubing and ensure the tubing does not have any sharp bends.

c. Connect the new tubing to the pressure sensor bubbler.

6. Close the measurement module door.

7. Select 

No

.

8. Reinstall the reagent cartridge and close the reagent cartridge door. 

9. Close the front cover.

10. Dispose of the tubing according to your institution’s protocol.

Testing for Leaks

1. To ensure that the tubing has been properly reinstalled, perform the Leak Test.

Refer to 

Performing the Leak Test

‚ page 6-37.

2. Select 

Return > Analyze > Yes

.

Yearly Maintenance

Yearly maintenance includes the following tasks:
•

Replacing the measurement module tubing and pressure sensor bubbler

•

Replacing the CO-ox tubing

•

Replacing the reagent manifold

•

Replacing the AutomaticQC manifold

•

Replacing the air filters

Summary of Contents for Rapidlab 1200

































































































































































































































































































































































































































































Reviews:

No comments