manualshive.com logo in svg

Siemens Rapidlab 1200, Operator'S Manual, Page: 136 / 448

Share
Download
Siemens Rapidlab 1200 Operator'S Manual Download Page 136

4-6

Rapidlab 1200 Operator’s Guide: Quality Control

02087462 Rev. V

Printing or Sending Results

At the Results screen, you can send the QC analysis results to your printer or to a data 
management system or an LIS.
•

To print a report, select the 

Print

 button.

•

To send the report to a data management system or an LIS, select 

Send

.

The report identifies the control and lists the target ranges as you defined them in Setup. A 
legend at the bottom explains the results symbols used in the report.

If you select RiliBÄK range checking in Setup, the report contains an additional line with 
the parameter target value and the percentage difference between the measured value and 
target. The report also displays a “Failed” message if the measured value exceeds the 
RiliBÄK range. Refer to 

Setting Up QC Options

‚ page 8-2.

Result Flags

The system displays the following symbols in red on the results screen and in the printed 
report:

This symbol...

Indicates that...

¦

the result is above the target range.

Ø

the result is below the target range.

-----

↑

the result is above the reporting range.

-----

↓

the result is below the reporting range.

-----

?

the system has an atypical response when measuring this 
parameter.

Summary of Contents for Rapidlab 1200

































































































































































































































































































































































































































































Reviews:

No comments