manualshive.com logo in svg

Sharp AR-M550N, Service Manual, Page: 203 / 460

Share
Download
Sharp AR-M550N Service Manual Download Page 203

: Feb. 6 2004

1

AR-M550/M620/M700  DETAILS OF EACH SECTION  6 - 148

2) Disconnect the connector, and remove the PCU PWB.

a-3. Driver PWB

1) Remove the rear cabinet and the rear cabinet upper.

2) Disconnect the connector, and remove the harness clamp and the

SCAN harness cover.

3) Remove the connector and the harness clamp. Remove the driver

PWB unit.

4) Remove the driver PWB.

a-4. Mother PWB

1) Remove the driver PWB unit. (See “a-3. Driver PWB” in this sec-

tion)

2) Remove the harness, and remove the mother PWB stay.

3) Disconnect the connector and remove the mother PWB unit. 

4) Remove the mother PWB.

1

1

Summary of Contents for AR-M550N













































































































































































































































































































































































































































































Reviews:

No comments