Sharp AR-M550N Service Manual Download Page 108

Page: 108 / 460

AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 53

a. Left door unit

1) Pull out the left door.

2) Remove the front cabinet.

3) Remove the fixing screw.

4) Remove the left door unit.

a-1. ADU opening/closing door

1) Pull out the left door.

2) Remove the stopper section plastic E-ring.

3) Remove the stopper from the fulcrum shaft to remove the opening/

closing door in the arrowed direction.

a-2. Paper exit roller 2

1) Pull out the left door.

2) Remove the ADU opening/closing door.

3) Remove the ADU paper exit upper paper guide.

4) Remove the ADU brake collar.

5) Remove the E-ring to remove the transport roller 2 assembly.

6) Remove the E-ring to remove the bearing, pulley, gear and pin

from the paper exit roller.

Summary of Contents for AR-M550N













































































































































































































































































































































































































































































Search results

Summary of Contents for AR-M550N

Reviews:

Sharp AR-M550N, Service Manual, Page: 108 / 460

Search results

Summary of Contents for AR-M550N

Reviews: