manualshive.com logo in svg

Sharp AR-M550N, Service Manual, Page: 144 / 460

Share
Download
Sharp AR-M550N Service Manual Download Page 144

AR-M550/M620/M700  DETAILS OF EACH SECTION  6 - 89

5. Scanner section

A. General

There are following three methods of scanning documents in this
machine.

a. Place a document on the table glass. The copy lamp unit is oper-

ated to radiate copy lamp light onto the document, scanning the
document with the CCD.

b. The SPF feeds a document. The copy lamp light is radiated onto

the document which is stopped at the specified position and the
document is scanned by the CCD.

c. The SPF feed a document. The LED light of the CIS unit which is

attached to the SPF is radiated to the back of the document, and
the document is scanned by the CIS.

Summary of Contents for AR-M550N













































































































































































































































































































































































































































































Reviews:

No comments