manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 99 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 99

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 8:  PRINT DRUM SECTION

[ 8 - 11 ]

4. Removing the Drum Body

(1) Make a confidential master on the print drum and pull out the drum from the machine.

(2) Remove the following components.

- Screen assembly
- Master clamp base assembly

(3) Loosen screws (M3x6: 2pcs) on the potbelly-shaped hole towards the tail end of the drum body (indicated

by the arrow marks on the photograph), and remove all other remaining screws (M3x6: 10pcs).

(4) Holding the drum body, so it does not pop open, peel off the tape which holds the top edge of the drum body

onto the tail end of the drum body.   (The tape will be reused in assembly.)

(5) Slide the drum body and unhook the potbelly-shaped holes from the two loosened screws, and then

remove the drum body.

- Precautions in assembly continues on next page -

Drum body

Tape

Joint section of the drum body.

< Enlarged View >

0822

0823

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments