manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 102 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 102

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 8:  PRINT DRUM SECTION

[ 8 - 14 ]

5. Removing the Ink Scraper Plate Assembly F & R

(1) Make a confidential master on the print drum and pull out the drum from the machine.

(2) Remove the following components.

- Screen assembly
- Master clamp base assembly
- Drum body

(3) Remove screws (M3x8: 1pc each), and remove the scraper plate assembly F & R.

Ink scraper assembly F

< Ink scraper assembly R >

Ink scraper assembly R

0831

0832

0834

0833

< Ink scraper assembly F >

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments