manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 183 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 183

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 13:  MASTER MAKING SECTION

[ 13 - 5 ]

3-2.  Master Cutting Mechanism   (Shuttle cutter :  excluding A3/Ledger machine)

The master is cut by the round disc shuttle cutter blade sliding from the home position at one end to the cutter
stop position on the other end of the cutter unit.   Once the disc blade cuts the master material, it returns back
to the home position to end the cutting operation.

The position of the disc blade is checked by the cutter HP SW and cutter stop position SW.   The blade is at
the home position when the cutter stop position SW is OFF and cutter HP SW is ON.

Cutter stop position SW

Home position

Stop position

Cutter motor

Disc blades

Cutter HP SW

1406

1407

1408

Shuttle

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments