Riso RZ5 Series Technical Manual Download Page 110

Page: 110 / 410

RISO Inc. Technical Services & Support

US.RISO.COM

CHAPTER 8: PRINT DRUM SECTION

[ 8 - 22 ]

13. Removing the Flange-F

(1) Make a confidential master on the print drum and pull out the drum from the machine.

(2) Remove the following components.

- Screen assembly
- Master clamp base assembly
- Drum body
- Drum side frames (2pcs)

(3) Disconnect two connectors from the print drum PCB, detach one reusable band from the drum front frame

assembly and detach the drum front frame assembly by removing screws (M4x8: 5pcs).

(4) Remove the lock-clip on the flange support roller found at the bottom of the drum, and detach the roller.

(5) Detach the flange-F.

* Remaining two flange support rollers can be removed after removing the flange-F.

Reusable band

Lock-clip

Flange support roller

Flange F

Drum front frame assembly

0854

0855

0856

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Search results

Summary of Contents for RZ5 Series

Reviews:

Riso RZ5 Series, Technical Manual, Page: 110 / 410

Search results

Summary of Contents for RZ5 Series

Reviews: