manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 96 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 96

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 8:  PRINT DRUM SECTION

[ 8 - 8 ]

Tail hanger

2. Removing the Screen Assembly

(1) Make a confidential master on the print drum and pull the print drum out of the machine.

(2) Remove screws from the tail hanger (M3x6: 2pcs).

(3) Remove screws from the top hanger (M3x6: 4pcs) and remove the screen assembly from the print drum.

Caution:   Do not fold or bend the screen assembly during the removal or installation.

Refer to the next page for the precautions in reassembly.

Screen  assembly

Top hanger

0812

0813

0814

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments