manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 69 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 69

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 5:  SECOND PAPER FEED SECTION

[ 5 - 11 ]

5. Removing the Print-positioning Intermediate Gear

(1) Switch off the machine power and remove the rear cover.

(2) Remove the E-ring and detach the print-positioning intermediate gear.

<< Precaution on Reassembly >>

Mount the print-positioning intermediate gear back on the machine after inserting the 8mm diameter Jig shaft
into the position-B phase alignment hole on the paper feed area so all other gears are aligned in position-B.

Print positioning intermediate gear

0517

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments