manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 74 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 74

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 5:  SECOND PAPER FEED SECTION

[ 5 - 16 ]

8. Removing the Print Positioning Pulse Motor

(1) Switch off the machine power, remove the rear cover, and swing open the PCB bracket of the power supply

and mechanical control PCBs.

(2) Remove the paper feed drive unit from the machine.

(3) To prevent the idler spring from moving the vertical print positioning unit, insert 8mm diameter jig shaft into

the position-B phase alignment hole on the paper feed drive unit. (The jig shaft holes on the outer and inner
vertical positioning gears meet every 5 turns of the inner vertical positioning gear.)

(4) Remove screws (M3x6: 2pcs) and remove the vertical pulse motor.

Vertical print positioning assembly

8mm dia. jig shaft

Inner vertical
positioning gear

Print positioning pulse motor

Idler spring

0524

< Paper Feed Drive Unit >

Outer vertical
positioning gear

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments