manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 138 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 138

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 10:  MASTER REMOVAL SECTION

[ 10 - 12 ]

6. Removing the Master Compression Plate HP Sensor

(1) Switch off the machine power and detach the master removal unit.

(2) Remove the compression gear cover and spur gear, and then lower the master compression plate.

(3) Unplug the sensor connector and detach the master compression plate HP sensor.

< Precaution in Reassembly >

Mount the master compression plate at its home position during the assembly.

Compression gear cover

Master compression plate

Spur gear

Master compression plate HP sensor

< Master Compression Plate at HP position >

< Master Compression Plate at its lowered position >

1024

1025

1026

1027

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments