manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 169 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 169

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 12:  AF SCANNING SECTION

[ 12 - 7 ]

2. Removing the Pickup Roller

(1) Switch off the machine power and open the AF unit.

(2) Remove the  AF cover and close the  AF unit.

(3) Detach the pickup roller by spreading out the tip of pickup-roller-arm by hand.

* Do not lose the plastic washer mounted next to the gear of the pickup roller.

< Precaution on Assembly >

Do nor forget to mount the plastic gear next to the gear of the pickup roller.

Pickup roller

Pickup roller arm

1307

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments