manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 44 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 44

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 4:  FIRST PAPER FEED SECTION

[ 4 - 12 ]

2. Removing Paper Det. Sensor, Paper Size Det. Sensor and Paper Width Potentiometer

(1) Lower the paper-feed tray all the way down, switch OFF the power to the machine.

(2) Remove the paper feed tray from the machine.

(3) Remove two shouldered screws.

(4) Remove the E-ring on the rear side, slide the Dial shaft to the front, and detach the paper-feed tray mount.

(5) Remove screws (3x8: 7pcs) and detach the paper-feed tray bottom frame.

< Operator side of machine >

< Drive side of machine >

Dial shaft

Paper feed tray bottom  frame

Paper feed tray mount

Shouldered screws

0419

0420

0421

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments