manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 141 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 141

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 10:  MASTER REMOVAL SECTION

[ 10 - 15 ]

(5) Remove E-rings and metal bushings from both ends of the roller hook shaft, and detach the master removal

roller (bottom) assembly by lifting it upwards.

(6) From the rear tip of the master removal roller (bottom) assembly, remove an E-ring and detach both the

spur gear and metal bushing.

(7) From the front tip of the master removal roller (bottom) assembly, remove an E-ring and detach the joint

arm, spur gear, and metal bushing.   Detach the master removal roller (bottom) from the assembly.

1035

1036

1037

1038

1039

1040

Roller hook shaft

Master removal roller (bottom)

Spur gear

Master removal roller (Bottom)

Joint arm

Spur gear

< Master Removal Roller (Bottom) Assembly >

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments