manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 211 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 211

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 13:  MASTER MAKING SECTION

[ 13 - 33 ]

Flat cable guiding box

< Master making unit >

Master making unit

(5) Pull out the flat cable guiding box in the direction indicated by an arrow mark on the photograph below, just

enough to unhook from the master making unit, and disengage it from the maser making unit.

(6) Push both the flat cable guiding box and flat cable support plate back into the machine.

(7) From the top of the master making unit, remove the four shoulder screws and detach the unit from the

machine by lifting it.

- Precaution in assembly continues on next page -

Hooks on the flat cable
support plate

Flat cable guiding box

< Rear >

< Front >

1469

1470

1471

1472

1473

Shoulder screws

Shoulder screws

Shoulder screws

Shoulder screws

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments