Riso RZ5 Series Technical Manual Download Page 280

Page: 280 / 410

RISO Inc. Technical Services & Support

US.RISO.COM

CHAPTER 1: MAINTENANCE

[ 1 - 38 ]

Stage cover

(1) Open the stage cover, remove a screw (M4x10: 1pc each) from each of the two hinges (right and left) of

the stage cover, and then attach those screws in the screw holes behind. Lift the stage cover off the
machine.

Side cover; paper ejection

(1) Remove screws (M4x8: 2pcs), and dismount the side cover;paper ejection.

Rear side cover; paper ejection

(1) Remove the following covers.

- Rear cover

- Stage cover

- Scanner rear cover

- Scanner cover;paper ejection

(2) Remove screws (M4x8: 2pcs), and dismount the rear side cover;paper ejection.

Stage cover

Side cover; paper ejection

Rear side cover; paper ejection

0112

manuals4you.com

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Search results

Summary of Contents for RZ5 Series

Reviews:

Riso RZ5 Series, Technical Manual, Page: 280 / 410

Search results

Summary of Contents for RZ5 Series

Reviews: