manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 212 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 212

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 13:  MASTER MAKING SECTION

[ 13 - 34 ]

< Precautions in Disassembly >

   -

Insert the flanged portion of the flat cable guiding box through the support hooks on the bottom of the
master making unit and engage the damper gear into the rack gear on the top surface of the flat cable
guiding box.

   - Place the cap portion of the flat cable bracket over the hooks on the front tip of the flat cable support plate

and hook the catch on the flat cable bracket on the rectangular hole on the master making unit front frame.

Damper gear

Support hooks on the bottom of the master making
unit

Rack gear molded on the flat cable guiding box

Rectangular hole to hook the flat cable bracket

Flanged portion on the flat cable guiding box

Cap portion on the flat cable bracket

Hooks at the tip of the flat cable support plate

Catch on the flat cable bracket to
hook into the rectangular hole on
the master making unit.

1474

1475

1476

1477

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments