manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 132 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 132

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 10:  MASTER REMOVAL SECTION

[ 10 - 6 ]

5. Master Disposal Box Safety SW

The master disposal box safety switch checks whether the master disposal box is correctly set on the machine.

When the master disposal box is not set on the machine, the master disposal safety switch prevents the main
motor, clamp motor, master removal vertical transport motor and master compression motor from turning ON.

In the case the master disposal box FULL indication LED lights up on the operation panel, the master disposal
box needs to be removed from the machine to switch OFF the master disposal box safety switch for 5 seconds
to reset and clear the LED indication.

1010

Master disposal box safety SW

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments