manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 48 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 48

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 4:  FIRST PAPER FEED SECTION

[ 4 - 16 ]

5. Removing the Paper Feed Tray Button and Paper Feed Tray Upper Safety Switch

(1) Lower the paper feed tray all the way down and turn OFF the machine power.

(2) Remove the following components.

- Paper feed cover
- Paper feed roller assembly

(3) Unplug two connectors.

(4) Detach the paper feed tray upper safety switch spring.

(5) Remove screws (M3x6: 3pcs), unplug the wire harness connector from the paper sensor, and remove the

first paper feed stay assembly.

Removing the paper feed tray button

(6) Unplug the connector and detach the button after unhooking the hooks ( two locations).

Removing the paper feed tray upper safety switch

(6) Unplug the connector, remove screws (M3x14: 2pcs), and detach the safety switch.

Paper feed tray button

Paper feed tray upper
safety switch spring

Paper feed tray upper
safety switch

< First paper feed stay assembly >

0428

0429

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments