Riso RZ5 Series Technical Manual Download Page 136

Page: 136 / 410

RISO Inc. Technical Services & Support

US.RISO.COM

CHAPTER 10: MASTER REMOVAL SECTION

[ 10 - 10 ]

4. Removing the Master Removal Sensor & Master Sensor

(1) Switch off the machine power and detach the master removal unit from the machine.

Removing the master sensor

(2) Disconnect the sensor connector, remove a screw (M3x6: 1pc), and detach the master sensor together

with the sensor bracket.

Removing the master sensor

(2) Disconnect the sensor connector, remove a screw (M3x6: 1pc) by inserting a screwdriver through a hole on

the master disposal housing, and detach the master sensor.

Master sensor

< Master Removal Unit >

Master disposal housing

Master removal sensor

1018

1019

1020

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Search results

Summary of Contents for RZ5 Series

Reviews:

Riso RZ5 Series, Technical Manual, Page: 136 / 410

Search results

Summary of Contents for RZ5 Series

Reviews: