Riso RZ5 Series Technical Manual Download Page 202

Page: 202 / 410

RISO Inc. Technical Services & Support

US.RISO.COM

CHAPTER 13: MASTER MAKING SECTION

[ 13 - 24 ]

11. Removing the Load Pulse Motor Assembly

(1) Pull out the master making unit and switch off the machine power.

(2) Open the master making unit upper cover and remove following items.

- Master roll
- master making cover front
- Write pulse motor assembly

(3) Detach the reusable bands (3 locations) from the bracket of the load pulse motor and unplug the load pulse

motor connector.

(4) Remove screws (M3x6: 2pcs) and detach the load pulse motor assembly.

Load pulse motor assembly

Reusable bands

Reusable band

1447

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Search results

Summary of Contents for RZ5 Series

Reviews:

Riso RZ5 Series, Technical Manual, Page: 202 / 410

Search results

Summary of Contents for RZ5 Series

Reviews: