manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 204 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 204

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 13:  MASTER MAKING SECTION

[ 13 - 26 ]

13.  Removing the Cutter Cover Assembly   (excluding A3/Ledger machines)

(1) Pull out the master making unit and switch off the machine power.

(2) Open the master making unit upper cover and remove following items.

- Master roll
- master making cover front
- Write pulse motor assembly
- Load pulse motor assembly

(3) Unplug the sensor connector, remove screws (M3x6: 2pcs), and detach the cutter cover assembly while

pulling out  the wire harness from the hole on the machine side frame.

Cutter cover assembly

1451

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments