manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 214 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 214

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 13:  MASTER MAKING SECTION

[ 13 - 36 ]

(6) Detach the master stocker roller (bottom) from the master making unit by removing E-rings and metal

bushings from both ends of the roller.

< Precaution in Assembly >

The movement of the master stocker guide plate may stick if the master stocker spring is hooked twisted
between the master stocker lever and master stocker guide plate.  After hooking the spring, check and confirm
that the master stocker guide plate opens and closes smoothly by pushing the plunger of the master stocker
solenoid.

 

< Front >

< Rear >

Master stocker roller (bottom)

Master stocker lever

Master stocker hook spring

Master stocker guide plate

Master stocker solenoid

1481

1482

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments