Riso RZ5 Series, Technical Manual, Page: 225 / 410

RISO Inc. Technical Services & Support US.RISO.COM
CHAPTER 14: PANEL MESSAGE
[ 14 - 7 ] RZ5 (Revision 1.0)
Error Type T05 [Print positioning pulse motor lock]
Description
T05-xxx
!!System Error!!
Press Reset Key
If Recovery has Failed, Call Service
To reset
display
Press Reset Key or turn the power OFF and ON.
Error Point Error Conditions
603
The vertical-centering sensor does not switch ON even when the vertical-positioning pulse
motor activated in the image-down direction for 5.5 seconds during vertical home positioning
movement.
604
The vertical-centering sensor does not switch OFF even when the vertical-positioning pulse
motor activated in the image-up direction for 5.5 seconds during vertical home positioning
movement.
605
Even though the vertical positioning motor stopped according to the vertical centering sensor
detection, the stopping position does not correspond with the programmed position. (GA
control error).
612 The print positioning key is pressed with vertical-print-position information undefined.
Error Type T11 [Print positioning pulse motor lock]
Description
T11-xxx
!!System Error!!
Press Reset Key
If Recovery has Failed, Call Service
To reset
display
Press Reset Key or turn the power OFF and ON.
Error Point Error Conditions
600
Print pressure HP sensor does not switch ON within 5 seconds after the print pressure pulse
motor activated towards higher pressure during home positioning operation.
601
Print pressure HP sensor does not switch OFF within 5 seconds after the print pressure pulse
motor activated towards lower pressure during home positioning operation.
602
Even though the print pressure control pulse motor stopped according to the print pressure HP
sensor detection, the stopping position does not correspond with the programmed position.
(GA control error).
614
Print pressure pulse motor does not complete its movement even after 7 seconds from the
print pressure HP movement to move -1000 pulses.