Riso RZ5 Series Technical Manual Download Page 194

Page: 194 / 410

RISO Inc. Technical Services & Support

US.RISO.COM

CHAPTER 13: MASTER MAKING SECTION

[ 13 - 16 ]

5. Removing the Master End Sensor (receive) Assembly

(1) Pull out the master making unit and switch off the machine power.

(2) Open the master making unit upper cover.

(3) Remove a screw (M3x6: 1pc), unplug the sensor connector and detach the master end sensor (receive)

assembly.

Master End sensor (receive) assembly

1430

1431

1432

Master End sensor (receive) assembly

< Master End Sensor (receive) Assembly >

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Search results

Summary of Contents for RZ5 Series

Reviews:

Riso RZ5 Series, Technical Manual, Page: 194 / 410

Search results

Summary of Contents for RZ5 Series

Reviews: